LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> LS 460 AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> Fuel Pump Resistor >> Removal >> Removal

Fuel Pump Resistor: Removal: Removal

  1. REMOVE COWL TOP VENTILATOR LOUVER RH  . Refer to REMOVAL - Step 1
  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE:

    After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

  3. REMOVE ENGINE ROOM SIDE COVER LH  . Refer to REMOVAL - Step 8
  4. REMOVE FUEL PUMP RESISTOR 
    Fig 1: Locating Fuel Pump Resistor
    GTY132768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the resistor connector.
    2. Remove the bolt and resistor.
scientia non olet · About LEMON Manuals