LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS F >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) >> Washer Level Warning Switch >> Installation >> Installation

Washer Level Warning Switch: Installation: Installation

  1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY 
    1. Install the washer level warning switch assembly.
      Fig 1: Identifying Level Warning Switch Assembly Connector
      GTY141154Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL FRONT BUMPER ASSEMBLY  . Refer to INSTALLATION - Step 1
  3. ADD WASHER FLUID  See step  3
  4. INSTALL RADIATOR GRILLE PROTECTOR  . Refer to INSTALLATION - Step 2
  5. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 3
  6. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT  . Refer to ADJUSTMENT - Step 1
  7. PREPARATION FOR FOG LIGHT AIMING  . Refer to ADJUSTMENT - Step 2
  8. INSPECT FOG LIGHT AIMING  . Refer to ADJUSTMENT - Step 3
  9. ADJUST FOG LIGHT AIMING  . Refer to ADJUSTMENT - Step 4
scientia non olet · About LEMON Manuals