Ignition Coil And Spark Plug: Installation: Installation

INSTALL SPARK PLUG
1. Install the 6 spark plugs.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
INSTALL IGNITION COIL ASSEMBLY
1. Install the 6 ignition coils with the 6 bolts.
  
  Fig 1: Location of Ignition Coil Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
2. Connect the 6 ignition coil connectors.
3. Connect the 3 wire harness clamps and the noise filter connector.
  
  Fig 2: Identifying Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE See step 2
INSTALL NO. 2 VENTILATION HOSE See step 3
INSTALL ENGINE ROOM SIDE COVER LH . Refer to INSTALLATION - Step 79
INSTALL ENGINE ROOM SIDE COVER . Refer to INSTALLATION - Step 80
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 81
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 78