LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250C Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Tilt And Telescopic Manual Switch >> Installation >> Installation

Tilt And Telescopic Manual Switch: Installation: Installation

  1. INSTALL TILT AND TELESCOPIC SWITCH 
    1. Engage the claw to install the tilt and telescopic switch.
      Fig 1: Location of Tilt And Telescopic Switch Connector
      GTY142865Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL STEERING COLUMN COVER (for Lower Side)  See step  12
  3. ADJUST SPIRAL CABLE  . Refer to INSTALLATION - Step 6
  4. INSTALL STEERING WHEEL ASSEMBLY  See step  10
  5. INSPECT STEERING WHEEL CENTER POINT 
  6. INSTALL STEERING PAD  . Refer to INSTALLATION - Step 1
  7. INSTALL LOWER NO. 3 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 2
  8. INSTALL LOWER NO. 2 STEERING WHEEL COVER  . Refer to INSTALLATION - Step 3
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL  See step  19
  10. INSPECT STEERING PAD  . Refer to INSTALLATION - Step 5
  11. INSPECT SRS WARNING LIGHT 
    1. Inspect the SRS warning light. Refer to DIAGNOSIS SYSTEM .
scientia non olet · About LEMON Manuals