Typical Enabling Conditions
ALL
| Monitor runs whenever following DTCs are not present | None |
MANUAL TRANSMISSION MODELS
| Monitor runs whenever following DTCs are not present | None |
| Time after engine switch off to on | 3 seconds or more |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | Off |
AUTOMATIC TRANSMISSION MODELS
| Monitor runs whenever following DTCs are not present | None |
| Both of the following conditions are met | Conditions 1 and 2 |
| 1. All of the following conditions are met | Conditions A, B, C and D |
| A. Battery voltage | 8 V or more |
| B. Engine switch | On (IG) |
| C. Time after engine switch off to on (IG) | More than 0.5 seconds |
| D. Starter | Off |
| 2. All of the following conditions are met | Condition E, F and G |
| E. Time after engine switch off to on (IG) | 3 seconds or more |
| F. Vehicle speed at output speed sensor | 5.59 mph (9 km/h) or more |
| G. Lost communication with TCM (U0101) | Not detected |