LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield / WINDOWGLASS (Service Information) >> Power Window Regulator Motor >> Removal >> Removal

Power Window Regulator Motor: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG  . Refer to DISASSEMBLY - Step 1
  3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY  . Refer to DISASSEMBLY - Step 2
  4. REMOVE COURTESY LIGHT ASSEMBLY  . Refer to DISASSEMBLY - Step 3
  5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 4
  6. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP  . Refer to DISASSEMBLY - Step 6
  7. REMOVE FRONT DOOR SERVICE HOLE COVER  . Refer to DISASSEMBLY - Step 14
  8. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 15
  9. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 16
  10. REMOVE FRONT POWER WINDOW REGULATOR MOTOR 
    1. Using a "torx" socket wrench (T25), remove the 3 screws and the front power window regulator motor.
      Fig 1: Locating Front Power Window Regulator Motor Screws
      GTY119072Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG  . Refer to DISASSEMBLY - Step 1
  12. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY  . Refer to DISASSEMBLY - Step 2
  13. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 3
  14. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP  . Refer to DISASSEMBLY - Step 5
  15. REMOVE REAR DOOR SERVICE HOLE COVER  . Refer to DISASSEMBLY - Step 11
  16. REMOVE REAR DOOR GLASS RUN  . Refer to DISASSEMBLY - Step 15
  17. REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 16
  18. REMOVE REAR DOOR QUARTER WINDOW GLASS  . Refer to DISASSEMBLY - Step 17
  19. REMOVE REAR DOOR GLASS SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 18
  20. REMOVE REAR DOOR WINDOW REGULATOR SUB-ASSEMBLY  . Refer to DISASSEMBLY - Step 19
  21. REMOVE REAR POWER WINDOW REGULATOR MOTOR 
    1. Using a "torx" socket wrench (T25), remove the 3 screws and the rear power window regulator motor.
      Fig 2: Locating Rear Power Window Regulator Motor Screws
      GTY118979Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals