Voice is not Recognized: Procedure

1. Display the "Voice Settings" screen.
   Fig 1: Identifying Voice Settings Display Screen

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check that "Voice Recognition Guidance" is not "Off".

   OK

   "Voice Recognition Guidance" is not "Off".

NG → TURN VOICE RECOGNITION GUIDANCE "On" 

OK: Go to next step 

1. Enter the "Microphone & Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check. Refer to OPERATION CHECK .
   Fig 2: Identifying Microphone & Voice Recognition Check Display Screen

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
3. Select the recording switch and perform voice recording.

   HINT: 

   • Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
   • Voice can be recorded up to 5 seconds.
4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

   OK

   All check results are normal.

   TEXT IN ILLUSTRATION
   
   

   *1	Microphone Input Level Meter
   *2	Recording Switch
   *3	Stop Switch
   *4	Play Switch
   *5	Recording Indicator

NG → See step   4 

OK: Go to next step 

1. Replace the hard disk drive. Refer to REMOVAL .
2. Check that voice recognition is normal.

   OK

   Voice can be recognized normally.

NG → See step   5 

OK → END