Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier: Procedure
- CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- STEREO COMPONENT AMPLIFIER ASSEMBLY)
- Disconnect the radio receiver assembly and stereo component amplifier assembly connectors.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition F66-19 (L-) - F69-2 (L-) Always Below 1 Ω F66-9 (L+) - F69-3 (L+) Always Below 1 Ω F66-18 (R-) - F69-4 (R-) Always Below 1 Ω F66-8 (R+) - F69-5 (R+) Always Below 1 Ω F66-10 (SLD) - Body ground Always 10 kΩ or higher F66-19 (L-) - Body ground Always 10 kΩ or higher F66-9 (L+) - Body ground Always 10 kΩ or higher F66-18 (R-) - Body ground Always 10 kΩ or higher F66-8 (R+) - Body ground Always 10 kΩ or higher
NG → REPAIR OR REPLACE HARNESS OR CONNECTOR
OK → See step 2
- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE