How To Proceed With Troubleshooting

HINT: 

• The wireless door lock control system troubleshooting procedures are based on the premise that the power door lock system, luggage compartment door open and close system, power window system and sliding roof system are operating normally. Check these systems first before troubleshooting the wireless door lock control system.
• Use these procedures to troubleshoot the wireless door lock control system.
• *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go to next step 

2. INSPECT BATTERY VOLTAGE 

   Standard voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding.

   NEXT: Go to next step 

3. INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)* 
   1. Use the Techstream to check if the Multiplex Communication System (MPX) is functioning normally.
      RESULT:
      
      

      Result	Proceed to
      MPX DTC is not output	A
      MPX DTC is output	B

      B → Go to MULTIPLEX COMMUNICATION SYSTEM 

      A: Go to next step 

4. PROBLEM SYMPTOMS TABLE 
   RESULT:
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B → Go to step   6 

   A: Go to next step 

5. OVERALL ANALYSIS AND TROUBLESHOOTING* 
   1. Operation check. Refer to OPERATION CHECK 
   2. Terminals of ECU. Refer to TERMINALS OF ECU 
   3. DATA LIST/ACTIVE TEST. Refer to DATA LIST/ACTIVE TEST 

      NEXT: Go to next step 

6. REPAIR OR REPLACE 

   NEXT: Go to next step 

7. CONFIRMATION TEST 

   NEXT → END