Rear Speed Sensor: Installation: Installation

1. Install the speed sensor rear with the bolt.
   Fig 1: Identifying Bolt Of Speed Sensor Rear LH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

   NOTE:

   Prevent foreign matter from attaching to the sensor tip.

2. Connect the speed sensor connector.

1. Install the rear wheel.

   Torque: 103 N*m (1, 050 kgf*cm, 76 ft.*lbf) 

for 2GR-FSE. Refer to TEST MODE PROCEDURE

for 1UR-FSE. Refer to TEST MODE PROCEDURE