LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> GS 350 AWD >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System (Service Information) >> Rear Acceleration Sensor >> Removal >> Removal

Rear Acceleration Sensor: Removal: Removal

NOTE:
  • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
  • The acceleration sensor removed from the vehicle must not be placed upside down.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE REAR ACCELERATION SENSOR ASSEMBLY 
    Fig 1: Identifying Acceleration Sensor Assembly
    GTY101984Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Fold back the upper part of the luggage compartment trim cover inner.
    2. Disconnect the sensor connector.
    3. Remove the bolt and sensor.
  3. REMOVE REAR ACCELERATION SENSOR 
    Fig 2: Identifying Acceleration Sensor
    GTY106574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the nut and sensor from the bracket.
scientia non olet · About LEMON Manuals