DTC P0111: Intake Air Temperature Sensor Gradient Too High: Procedure

CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111)

Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Powertrain / Engine / Trouble Codes.

Read the DTCs.

Result

Result	Proceed to
P0111 and other DTCs	A
P0111	B

HINT:

If any DTCs other than P0111 are output, troubleshoot those DTCs first.

B → See step 3

A → See step 2

GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART
REPLACE MASS AIR FLOW METER. Refer to REMOVAL