DTC P2610: ECM / PCM Internal Engine Off Timer Performance: Procedure

REPLACE ECM
1. Replace the ECM. Refer to REMOVAL .
NEXT: Go to next step
CHECK WHETHER DTC OUTPUT RECURS
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON and turn the Techstream ON.
3. Clear DTCs. Refer to DTC CHECK / CLEAR .
4. Refer to the confirmation driving pattern P2610.
5. Enter the following menus: Powertrain / Engine / Trouble Codes.
6. Read the DTCs.
  HINT:
  
  If no pending DTC is displayed, the repair has been successfully completed.
NEXT → END