LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> RX 350 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Engine Control System [2GR-FE] (Service Information)) >> Knock Sensor >> Removal >> Removal

Knock Sensor: Removal: Removal

WARNING: This page is about a different car, the 2011 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold. Refer to REMOVAL .
  2. REMOVE KNOCK CONTROL SENSOR 
    1. Disconnect the 2 knock control sensor connectors.
      Fig 1: Location of Knock Control Sensor Connectors And Bolts
      GTY146483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and 2 knock control sensors.
scientia non olet · About LEMON Manuals