Shift Paddle Switch: Removal: Removal

PRECAUTION (w/ Navigation System for HDD)
NOTE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
WARNING:
Wait at least 90 seconds after disconnecting the cable from the negative(-) battery terminal to disable the SRS system.
REMOVE LOWER NO. 3 STEERING WHEEL COVER . Refer to REMOVAL - Step 3
REMOVE LOWER NO. 2 STEERING WHEEL COVER . Refer to REMOVAL - Step 4
REMOVE STEERING PAD . Refer to REMOVAL - Step 5
REMOVE STEERING WHEEL ASSEMBLY . Refer to REMOVAL - Step 7

REMOVE SHIFT PADDLE SWITCH

Disconnect the clamp from the steering wheel assembly.

Fig 1: Identifying Steering Wheel Assembly Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Disconnect the switch wire connector from the steering wheel assembly.
Disconnect the 2 connectors from the 2 shift paddle switches, and remove the switch wire.

Fig 2: Identifying Steering Wheel Assembly Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
TEXT IN ILLUSTRATION

*1 Switch Wire

Remove the 4 screws, 2 brackets and 2 shift paddle switches.

Fig 3: Identifying Shift Paddle Switch Bracket

TEXT IN ILLUSTRATION

*1	Shift Paddle Switch
*2	Bracket