Fuel Pump Resistor: Installation: Installation

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the bolt.
  
  Fig 1: Identifying Fuel Pump Resistor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  for bolt A
  
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
2. Install the ground wires with the 2 bolts.
  for bolt B
  
  Torque: 8.0 N*m (80 kgf*cm, 69 in.*lbf)
3. Connect the connector and clamp.
INSTALL ENGINE ROOM SIDE COVER . Refer to INSTALLATION - Step 80
INSTALL COOL AIR INTAKE DUCT SEAL . Refer to INSTALLATION - Step 81
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL