LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> IS 350 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostic Codes) (P0171-P060E) >> SFI System >> DTC P0500: Vehicle Speed Sensor "A" >> Typical Enabling Conditions

Typical Enabling Conditions

Monitor runs whenever following DTCs are not present None
Engine switch On (IG)
Time after engine switch off to on (IG) 3 seconds or more
Battery voltage 8 V or more
Starter OFF
Either of the following conditions is met: Condition A or B
A, All of the following conditions are met: Conditions (a) , (b) and (c)
(a) ECT 20°C or more
(b) ECT sensor circuit fail (P0115, P0117 and P0118) Not detected
(c) Time after park/neutral position switch on to off 10 seconds or more
B, Both of the following conditions are met: Conditions (d) and (e)
(d) Either of the following conditions is met: Condition 1 or 2
1, ECT Less than 20°C
2, ECT sensor circuit fail (P0115, P0117, P0118 and P0125) Not detected
(e) Time after park/neutral position switch on to off 30 seconds or more