Wireless Transmitter Memory Function does not Operate: Procedure
WARNING: This page is about a different car, the 2010 Lexus GS 460 and 2010 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK WIRELESS DOOR LOCK OPERATION (WIRELESS DOOR LOCK / UNLOCK OPERATION)
- Using the standard operation procedure, check that the wireless door lock / unlock operates normally.
OK
Wireless door lock / unlock operates normally.
HINT:
The standard operating procedure is as follows:
Hold the transmitter approximately 1 m (3.28 ft) from the driver door outside handle. Press and hold the transmitter's LOCK or UNLOCK switch for 1 second.
NG → GO TO WIRELESS DOOR LOCK CONTROL SYSTEM
OK: Go to next step
- Using the standard operation procedure, check that the wireless door lock / unlock operates normally.
- CHECK SEAT MEMORY SWITCH FUNCTION (SEAT POSITION MEMORY FUNCTION)
- Perform a memory operation properly. Check that the buzzer sounds to indicate the completion of the memory operation.NOTE:
- The seat position will not be recorded if the SET switch and 2 or more of the memory switches (for example, M1 and M2) are pressed simultaneously.
- If a memorizing operation has failed, release all switches. The seat memory function does not operate unless the switches are released.
OK
Seat memory switch function operates normally.
NG → GO TO 4
OK: Go to next step
- Perform a memory operation properly. Check that the buzzer sounds to indicate the completion of the memory operation.
- CHECK MEMORY CALL FUNCTION (REGISTER RECOGNITION CODE)
- While pressing the M1, M2 or M3 switch, press the transmitter's LOCK or UNLOCK switch. Check that the buzzer sounds normally.
OK
Buzzer sounds normally.
NG → REPLACE POSITION CONTROL ECU & SWITCH ASSEMBLY LH
OK → END
- While pressing the M1, M2 or M3 switch, press the transmitter's LOCK or UNLOCK switch. Check that the buzzer sounds normally.