LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> GS 350 RWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting (Service Information) >> Engine Switch >> Removal >> Removal

Engine Switch: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH  . Refer to REMOVAL - Step 17
  3. REMOVE FRONT CONSOLE UPPER PANEL ASSEMBLY  . Refer to REMOVAL - Step 18
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  . Refer to REMOVAL - Step 20
  5. REMOVE FRONT DOOR SCUFF PLATE LH  . Refer to REMOVAL - Step 9
  6. REMOVE FRONT DOOR OPENING TRIM COVER LH  . Refer to REMOVAL - Step 11
  7. REMOVE INSTRUMENT SIDE PANEL LH  . Refer to REMOVAL - Step 27
  8. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  . Refer to REMOVAL - Step 29
  9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  . Refer to REMOVAL - Step 11
  10. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 28
  11. REMOVE ENGINE SWITCH 
    Fig 1: Identifying Engine Switch
    GTY102282Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
scientia non olet · About LEMON Manuals