Instrument Panel Safety Pad: Disassembly
WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT
- Remove the 2 screws < F > and the side No. 1 defroster nozzle duct.
- REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT
- Remove the 2 screws < F > and the side No. 2 defroster nozzle duct.
- REMOVE DEFROSTER NOZZLE ASSEMBLY
- Remove the 3 screws < F > and the defroster nozzle assembly.
- REMOVE NO. 1 HEATER TO REGISTER DUCT
- Remove the 3 screws < F > and the No. 1 heater to register duct.
- REMOVE NO. 2 HEATER TO REGISTER DUCT
- Remove the 4 screws < F > and the No. 2 heater to register duct.
- REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (See REMOVAL )
- REMOVE NO. 3 INSTRUMENT PANEL WIRE
- Disconnect the connector.
- Disengage the 3 clamps and remove the No. 3 instrument panel wire.
- REMOVE NAVIGATION ANTENNA ASSEMBLY (See REMOVAL )
- REMOVE AUTOMATIC LIGHT CONTROL SENSOR
- Disengage the 2 claws and remove the automatic light control sensor.
- REMOVE NO. 1 METER HOOD RETAINER
- Remove the 2 screws < l > and the 2 No. 1 meter hood retainer.
- REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (See INSTALLATION )
- REMOVE NO. 1 INSTRUMENT PANEL PIN
- Remove the 4 screws < l > and the 4 No. 1 instrument panel pins.
- REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
- Disengage the 3 claws < A >.
- Disengage the 3 claws < B > and remove the No. 1 defroster nozzle garnish as shown in the illustration.
- REMOVE NO. 2 DEFROSTER NOZZLE GARNISH
- Disengage the 3 claws < A >.
- Disengage the 3 claws < B > and remove the No. 2 defroster nozzle garnish as shown in the illustration.