Inspection Procedure
WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- READ VALUE OF INTELLIGENT TESTER
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG) and turn the intelligent tester main switch on.
- Select the items below in the DATA LIST, and read the display on the intelligent tester.
MAIN BODY (MAIN BODY ECU):
DATA LISTTester Display Measurement Item/Range Normal Condition Diagnostic Note D LOCK POS SW Driver side door lock position switch signal / ON or OFF ON: Driver side door is unlocked
OFF: Driver side door is locked- P LOCK POS SW Passenger side door lock position switch signal / ON or OFF ON: Passenger side door is unlocked
OFF: Passenger side door is locked- RR LOCK POS SW Rear right door lock position switch signal / ON or OFF ON: Rear right door is unlocked
OFF: Rear right door is locked- RL LOCK POS SW Rear left door lock position switch signal / ON or OFF ON: Rear left door is unlocked
OFF: Rear left door is locked- OK: Normal conditions listed above are displayed.
NG: GO TO POWER DOOR LOCK CONTROL SYSTEM
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE