Glove Box Light: Installation
WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL GLOVE BOX LIGHT ASSEMBLY
- Install the glove box light assembly as shown in the illustration.
- INSTALL LOWER INSTRUMENT PANEL RH (See INSTALLATION )
- INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (See INSTALLATION )
- INSTALL SIDE INSTRUMENT PANEL RH (See INSTALLATION )
- INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
- INSTALL FRONT DOOR OPENING TRIM COVER RH (See INSTALLATION )
- INSTALL FRONT DOOR SCUFF PLATE RH (See INSTALLATION )
- INSTALL INSTRUMENT PANEL FINISH PANEL END RH (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )
- PERFORM INITIALIZATION NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).