Front Shock Absorber: Disposal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

DISPOSE OF FRONT SHOCK ABSORBER
1. Fully extend the shock absorber rod.
2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.
  CAUTION:
  - Be careful when drilling because shreds of metal may fly about. Always use the proper safety equipment.
  - The gas is colorless, odorless and non-poisonous.
    
    Fig 1: Identifying Cylinder Hole Length
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002