LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Cooling System) >> Thermostat >> Removal

Section 71 (Engine Cooling System): Thermostat: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. DRAIN ENGINE COOLANT 
  2. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE COOL AIR INTAKE DUCT SEAL 
  4. REMOVE ENGINE ROOM SIDE COVER RH 
  5. REMOVE FRONT FENDER APRON SEAL RH 
  6. REMOVE NO. 2 ENGINE MOUNTING STAY RH  (See REMOVAL )
  7. REMOVE ENGINE MOVING CONTROL ROD SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE V-RIBBED BELT  (See INSPECTION )
  9. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY  (See REMOVAL )
  10. DISCONNECT RADIATOR HOSE OUTLET  (See REMOVAL )
  11. REMOVE WATER INLET 
    1. Remove the 2 nuts and water inlet.
  12. REMOVE THERMOSTAT 
    1. Remove the gasket from the thermostat.
      Fig 1: Locating Nuts And Water Inlet
      G04975332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals