LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Supplemental Restraint System) >> Seat Position Sensor >> Removal

Seat Position Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 
    CAUTION: Be sure to read "PRECAUTION " thoroughly before servicing .
  2. REMOVE FRONT SEAT HEADREST ASSEMBLY 
  3. REMOVE SEAT BELT ANCHOR COVER CAP LH  (See REMOVAL )
  4. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH  (See REMOVAL )
  5. REMOVE FRONT SEAT OUTER TRACK BRACKET COVER LH  (See REMOVAL )
  6. REMOVE FRONT SEAT INNER TRACK BRACKET COVER LH  (See REMOVAL )
  7. REMOVE FRONT SEAT REAR OUTER TRACK BRACKET COVER LH  (See REMOVAL )
  8. REMOVE FRONT SEAT REAR INNER TRACK BRACKET COVER LH  (See REMOVAL )
  9. REMOVE FRONT SEAT ASSEMBLY LH  (See REMOVAL )
  10. REMOVE SEAT POSITION SENSOR 
    1. Disconnect the connector.
    2. Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
      Fig 1: Locating Seat Position Sensor Screw
      G05251903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.
      Fig 2: Removing Seat Position Sensor (For Power Seat)
      G04979727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals