LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2010 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Theft Deterrent) >> Security Horn Assembly >> Installation

Security Horn Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SECURITY HORN ASSEMBLY 
    1. Connect the connector.
    2. Install the security horn assembly with the bolt.

    Torque: 31 N*m (316 kgf*cm, 23 ft.*lbf) 

    Fig 1: Identifying Security Horn Assembly With Bolt
    G05252094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SUSPENSION UPPER BRACE CENTER  ( INSTALLATION )
  3. INSTALL ENGINE ROOM SIDE COVER RH  ( INSTALLATION )
  4. INSTALL HOOD HINGE COVER RH  ( INSTALLATION )
  5. INSTALL ENGINE ROOM SIDE COVER LH  ( INSTALLATION )
  6. INSTALL HOOD HINGE COVER LH  ( INSTALLATION )
  7. INSTALL COOL AIR INTAKE DUCT SEAL  ( INSTALLATION )
scientia non olet · About LEMON Manuals