Typical Enabling Conditions
ALL:
| Monitor runs whenever following DTCs are not present | None |
CASE 1:
| Engine switch | On (IG) |
| Engine | Running |
| Battery voltage | 8 V or more |
| Starter | OFF |
| Time after engine switch off to on (IG) | More than 0.5 seconds |
| CPU clock elapsed time | 600 seconds or more |
CASE 2:
| Internal engine OFF timer (elapsed time from engine stop) | 10 to 300 minutes |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Time after engine switch off to on (IG) | More than 0.5 seconds |
CASE 3:
| Internal engine OFF timer (elapsed time from engine stop) | 400 minutes |
| Battery voltage | 8 V or more |
| Engine switch | On (IG) |
| Starter | OFF |
| Time after engine switch off to on (IG) | More than 0.5 seconds |