VSC Buzzer Circuit (TO 12/2010): Procedure
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CAN COMMUNICATION SYSTEM
- Check if a CAN communication system DTC is output. Refer to DIAGNOSIS SYSTEM
.
Result
Result Proceed to DTC is not output A DTC is output B
B → See step 4
A: Go to next step
- Check if a CAN communication system DTC is output. Refer to DIAGNOSIS SYSTEM
.
- CHECK MULTIPLEX COMMUNICATION SYSTEM
- Check if a multiplex communication system DTC is output. Refer to DTC CHECK / CLEAR
.
Result Proceed to DTC is not output A DTC is output B
B → See step 5
A: Go to next step
- Check if a multiplex communication system DTC is output. Refer to DTC CHECK / CLEAR
.
- INSPECT COMBINATION METER ASSEMBLY
- Turn the ignition switch off.
- Check the combination meter. Refer to DATA LIST / ACTIVE TEST
.
OK
The combination meter is normal.
HINT:
If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step. Refer to PROBLEM SYMPTOMS TABLE .
NG → See step 6
OK → REPLACE ABS & TRACTION ACTUATOR ASSEMBLY
- INSPECT CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- INSPECT MULTIPLEX COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING
- REPLACE COMBINATION METER ASSEMBLY. Refer to REMOVAL