Typical Enabling Conditions
| Monitor will run whenever these DTCs are not present | P0110, P0112, P0113 (Intake Air Temperature Sensor) |
COLD START MONITOR - TYPICAL ENABLING CONDITIONS
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| Soak time | 0 seconds or more |
| Accumulated MAF | 1,610 g (56.8 oz.) or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
SOAK MONITOR - TYPICAL ENABLING CONDITIONS
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| When either condition below is met | - |
| - ECT at engine start | 60°C (140°F) or more |
| - Accumulated MAF | 2,749 g (97 oz.) or more |