Wheel Opening Moulding: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

INSTALL FRONT FENDER WHEEL OPENING MOULDING LH
1. Attach the clip to install the moulding.
2. Install the 5 screws
INSTALL QUARTER PANEL WHEEL OPENING MOULDING LH
1. Install the moulding with the 4 screws.
Fig 2: Identifying Front Fender Wheel Opening Moulding And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002