Rear Power Window Switch: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT

Use the same procedures for the LH side and RH side
The procedures listed below are for the RH side.

REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
1. Using a screwdriver, detach the 2 clips.
  HINT:
  
  Tape the screwdriver tip before use.
  
  Fig 1: Detaching Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the armrest base panel assembly.
  
  Fig 2: Identifying Power Window Regulator Switch Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Detach the 2 claws and remove the power window regulator switch
Fig 3: Identifying Power Window Regulator Switch Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002