Rear Power Window Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the LH side and RH side.
The procedures listed below are for the RH side.

INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
1. Install the power window regulator switch with the 2 claws.
  
  Fig 1: Identifying Power Window Regulator Switch With Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector.
  
  Fig 2: Identifying Power Window Regulator Switch Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Attach the 2 clips to install the armrest base panel assembly.
Fig 3: Attaching Clips To Armrest Base Panel Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002