Customize Parameters
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
- CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER OR TECHSTREAM (REFERENCE) (EXCEPT KOREA)
NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- Connect the intelligent tester or Techstream to the DLC3.
- Turn the power switch ON (IG)
- Turn the tester on.
- Enter the following menus:
- Intelligent tester - Select CUSTOMIZE
- Techstream - Select. Customize Setting.
- Select the setting by referring to the table below.
- Intelligent tester
SECURITY
SECURITY REFERENCEDisplay (Item) Default Contents Setting WARNING (HORN) ON Function that allows vehicle horns and security horn to be used as warning device ON / OFF PASSIVE MODE OFF Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed
In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened- Unlock any door by key or wireless operation
- Turn power switch ON (IG)
ON / OFF ENTRY DELAY 14s Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE 0 s/14 s/30 s - Techstream
Security
SECURITY REFERENCE
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Warning by Horn | ON | Function that allows vehicle horns and security horn to be used as warning device | ON / OFF |
| Passive Mode (Security System) | OFF | Passive arming mode is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed In passive arming mode, theft deterrent system will judge that a theft is taking place and switch to alarm sounding state if one of the following operations are not performed within 14 seconds (see entry delay below) after door is opened
|
ON/OFF |
| Entry Delay Time | 14s | Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE | 0 s/14 s/30 s |