LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Theft Deterrent) >> Security Horn Assembly >> Installation

Security Horn Assembly: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS )

  1. INSTALL SECURITY HORN ASSEMBLY 
    1. Install the horn with the bolt.
      2. Fig 1: Locating Security Horn Bolt
      G04951368Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector
  2. INSTALL COWL TOP VENTILATOR LOUVER LH  (See INSTALLATION )
  3. INSTALL FRONT FENDER TO COWL SIDE SEAL LH  (See INSTALLATION )
  4. INSTALL FRONT FENDER TO COWL SIDE SEAL RH  (See INSTALLATION )
  5. INSTALL HOOD TO COWL TOP SEAL  (See INSTALLATION )
  6. INSTALL FRONT UPPER FENDER PROTECTOR LH  (See INSTALLATION )
  7. INSTALL FRONT UPPER FENDER PROTECTOR RH  (See INSTALLATION )
  8. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION )
  9. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION )
  10. INSTALL FRONT WIPER ARM LH  (See INSTALLATION )
  11. INSTALL FRONT WIPER ARM RH  (See INSTALLATION )
scientia non olet · About LEMON Manuals