LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Pre-Collision) >> Driver Monitor Ecu >> Removal

Driver Monitor Ecu: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  4. REMOVE NO. 1 INSTRUMENT CLUSTER MOULDING  (See REMOVAL )
  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  8. REMOVE DRIVER MONITOR ECU 
    1. Disconnect the connectors
    2. Remove the 2 nuts and ECU
      Fig 1: Locating Driver Monitor ECU Connectors And Nuts
      G04950920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 nuts and ECU
    Fig 2: Identifying Driver Monitor ECU Nuts
    G05775773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals