Stereo Jack Adapter Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See REMOVAL ).
REMOVE BATTERY SERVICE HOLE COVER LH (See REMOVAL ).
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
REMOVE INSTRUMENT PANEL FINISH PANEL END RH (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL END LH (See REMOVAL )
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 3 BOX PANEL (See REMOVAL )
REMOVE REAR UPPER CONSOLE PANEL (See REMOVAL )
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE LOWER CONSOLE BOX POCKET
1. Disconnect the connector.
2. Detach the 8 claws and remove the console box pocket.
  
  Fig 1: Identifying Claws And Console Box Pocket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO JACK ADAPTER ASSEMBLY
1. Detach the 2 claws and remove the adapter.
  
  Fig 2: Removing Stereo Jack Adapter Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE LOWER CONSOLE BOX POCKET (for Ottoman)
1. Disconnect the connector.
2. Detach the 8 claws and remove the console box pocket.
  
  Fig 3: Identifying Claws And Console Box Pocket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEREO JACK ADAPTER ASSEMBLY (for Ottoman)
1. Detach the 2 claws and remove the adapter.
  
  Fig 4: Removing Stereo Jack Adapter Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002