Turn Signal Flasher Assembly: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE INSTRUMENT PANEL SAFETY PAD
HINT:

Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" (see REMOVAL ).
REMOVE TURN SIGNAL FLASHER ASSEMBLY
1. Detach the clip.
2. Disconnect the connector and remove the turn signal flasher.
  
  Fig 1: Locating Turn Signal Flasher Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002