Headlight Dimmer Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEADLIGHT DIMMER SWITCH
1. Insert the headlight dimmer switch into the steering column making sure that the stopper's protrusions and cutout parts align.
  
  Fig 1: Inserting Headlight Dimmer Switch Into Steering Column
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the headlight dimmer switch with the band clamp and claw.
  
  Fig 2: Identifying Headlight Dimmer Switch With Band Clamp And Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

Fig 3: Locating Windshield Wiper Switch Assembly Connectors
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Attach the claw and install the windshield wiper switch.
2. Connect the connectors.
INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera) (See INSTALLATION )
INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera) (See INSTALLATION )
INSPECT SPIRAL CABLE SUB- ASSEMBLY (See INSPECTION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSPECT STEERING WHEEL CENTER POINT
INSPECT STEERING PAD (See INSTALLATION )
INSTALL STEERING WHEEL PAD (See INSTALLATION )
INSTALL NO. 2 STEERING WHEEL COVER LOWER (See INSTALLATION )
INSTALL SWITCH AND VOLUME CASE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
- Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (see CUSTOMIZE PARAMETERS ).
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).