LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting) >> Hazard Warning Switch >> Installation

Hazard Warning Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HAZARD WARNING SWITCH 
    Fig 1: Identifying Hazard Warning Signal Switch Claws
    G05782986Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Attach the 2 claws and install the hazard warning switch
    2. Connect the connector
  2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY (for HDD)  (See INSTALLATION )
  3. INSTALL MULTI-DISPLAY ASSEMBLY  (See INSTALLATION )
  4. INSTALL RADIO RECEIVER ASSEMBLY  (See INSTALLATION )
  5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL REAR CONSOLE PANEL UPPER  (See INSTALLATION )
  7. INSTALL NO. 3 BOX PANEL  (See INSTALLATION )
  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY  (See INSTALLATION )
  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH  (See INSTALLATION )
  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH  (See INSTALLATION )
  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
  12. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
  13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals