FOOTWELL Light: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the LHD and RHD.
The procedures listed below are for the LHD.

REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE FOOTWELL LIGHT (for LH Side)
1. Detach the 2 hooks and remove the light.
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )

Fig 1: Identifying Footwell Light Hooks
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FOOTWELL LIGHT (for RH Side)
1. Detach the 2 hooks and remove the light.
  
  Fig 2: Identifying Footwell Light Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH
1. Remove the 2 screws.
2. Detach the 2 hooks and remove the seatback board.
3. Remove the interior illumination light wire harness clamp.
4. Disconnect the light wire harness connector.
  
  Fig 3: Identifying Front Seatback Board Sub-Assembly LH Screws And Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FOOTWELL LIGHT (for Seatback)
1. Remove the screw and light.
  
  Fig 4: Locating Footwell Light Screw (For Seatback)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002