FOOTWELL Light: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT.

Use the same procedures for the LHD and RHD
The procedures listed below are for the LHD

INSTALL FOOTWELL LIGHT (for Seatback)
1. Install the light with the screw.
  
  Fig 1: Locating Footwell Light Screw (For Seatback)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH
1. Attach the 2 hooks and install the seatback board
2. Connect the interior illumination light wire harness connector
3. Install the light wire harness clamp.
4. Install the 2 screws.
  
  Fig 2: Identifying Front Seatback Board Sub-Assembly LH Screws And Hooks
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FOOTWELL LIGHT (for RH Side)

Fig 3: Identifying Footwell Light Hooks
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Attach the 2 hooks and install the light.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL FOOTWELL LIGHT (for LH Side)

Fig 4: Identifying Footwell Light Hooks
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Attach the 2 hooks and install the light
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See INSTALLATION )