FOOTWELL Light: Inspection

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FOOTWELL LIGHT (for LH Side)

Apply battery voltage to the connector, and check the LED illumination condition

MEASUREMENT CONDITION SPECIFIED CONDITION REFERENCE CHART

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 2 (+B) Battery positive (-) → Terminal 1 (GND)	Light illuminates

If the result is not as specified, there may be a malfunction on the light

Fig 1: Identifying Footwell Light Connector Terminals (For LH Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSPECT FOOTWELL LIGHT (for RH Side)

Apply battery voltage to the connector, and check the LED illumination condition.

MEASUREMENT CONDITION SPECIFIED CONDITION REFERENCE CHART

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 2 (+B) Battery positive (-) → Terminal 1 (GND)	Light illuminates

If the result is not as specified, there may be a malfunction on the light.

Fig 2: Identifying Footwell Light Connector Terminals (For RH Side)

INSPECT FOOTWELL LIGHT (for Seatback)

Apply battery voltage to the connector, and check the LED illumination condition.

TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 2 (+B) Battery positive (-) → Terminal 1 (GND)	Light illuminates

If the result is not as specified, there may be a malfunction on the light

Fig 3: Identifying Footwell Light Connector Terminals (For Seatback)