LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Lighting) >> Back Door Courtesy Switch >> Installation

Back Door Courtesy Switch: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY 
    Fig 1: Identifying Luggage Door Closer Assembly Bolts
    G05783002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the connector
    2. Install the closer with the 3 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

  2. INSTALL BACK DOOR TRIM COVER  (See INSTALLATION )
  3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH  (See INSTALLATION )
  4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH  (See INSTALLATION )
  5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH  (See INSTALLATION )
  6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH  (See INSTALLATION )
  7. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY  (See INSTALLATION )
  8. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)  (See INSTALLATION )
  9. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP  (See INSTALLATION )
scientia non olet · About LEMON Manuals