LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Brake System (Service Information)) >> Brake Pedal Support >> Reassembly

Brake Pedal Support: Reassembly

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY 
    1. Install the cushion to the brake pedal.
      Fig 1: Locating Cushion From Brake Pedal
      G04949838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the brake pedal support to the brake pedal with the hexagon bolt and nut

      Torque: 28 N*m (290 kgf*cm, 21 ft.*lbf) 

      Fig 2: Locating Brake Pedal Support To Brake Pedal With Hexagon Bolt And Nut
      G04949837Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. TEMPORARILY INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Temporarily install the brake pedal stroke sensor with the 2 bolts.

      HINT:

      Tighten the 2 bolts after adjusting the brake pedal height and brake pedal stroke sensor.

  3. INSTALL BRAKE PEDAL PAD 
    1. Install the brake pedal pad to the brake pedal.
      2. Fig 3: Installing Brake Pedal Pad From Brake Pedal
      G04949836Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. TEMPORARILY INSTALL STOP LIGHT SWITCH ASSEMBLY 
    1. Temporarily install the stop light switch with the lock nut.

      HINT:

      Tighten the lock nut after inspecting and adjusting the brake pedal height.

scientia non olet · About LEMON Manuals