LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Intake) >> Air Cleaner And Hose >> Installation

Air Cleaner And Hose: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL AIR CLEANER ASSEMBLY LH 
    1. Align the air cleaner case's 2 holes to the 2 stud bolts and attach the air cleaner case to the boss. Then install the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

      Fig 1: Locating Air Cleaner Case Nuts
      G05773204Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the air cleaner element
    3. Install the air cleaner cap and secure the 2 clamps.
      4. Fig 2: Locating Air Cleaner Clamps
      G05773205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the MAF meter connector.
  2. INSTALL AIR CLEANER ASSEMBLY RH 
    1. Align the air cleaner case's 2 holes to the 2 stud bolts and attach the air cleaner case to the boss. Then install the 2 nuts.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

      Fig 3: Locating Air Cleaner Case Nuts
      G05773203Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the air cleaner element.
    3. Install the air cleaner cap and secure the 2 clamps
      4. Fig 4: Locating Air Cleaner Clamps
      G05773202Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Connect the MAF meter connector.
  3. INSTALL INTAKE AIR CONNECTOR PIPE  (See INSTALLATION )
  4. INSTALL NO. 1 AIR CLEANER INLET  (See INSTALLATION )
  5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY  (See INSTALLATION )
  6. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals