LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Cruise Control) >> Millimeter Wave Radar Sensor >> Installation

Millimeter Wave Radar Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    1. Install the sensor with the 3 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the sensor connector.
    Fig 1: Locating Sensor Connector Bolts
    G05776083Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY  (See ADJUSTMENT )
  3. INSTALL RADIATOR GRILLE ASSEMBLY  (See INSTALLATION ).
  4. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION ).
  5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY  (See INSTALLATION ).
  6. INSTALL ENGINE ROOM SIDE COVER LH  (See INSTALLATION ).
  7. INSTALL ENGINE ROOM SIDE COVER RH  (See INSTALLATION ).
scientia non olet · About LEMON Manuals