Side Airbag Sensor: Removal

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.

REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH
1. Remove the front seat outer belt (see REMOVAL ).
REMOVE FRONT SEAT BELT RETRACTOR COVER LH
1. Detach the claw and remove the front seat belt retractor cover from the body
  
  Fig 1: Identifying Front Seat Belt Retractor Cover Claw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SIDE AIRBAG SENSOR
1. Remove the bolt and side airbag sensor from the body.
2. Disconnect the connector
Fig 2: Locating Side Airbag Sensor Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002