LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Supplemental Restraint System) >> Seat Position Sensor >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK SEAT POSITION AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (see DIAGNOSIS SYSTEM  ).
  2. CHECK SEAT POSITION AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION) 
    1. Perform a diagnostic system check (see DIAGNOSIS SYSTEM  ).
    2. Even if the airbag was not deployed, check if there is any damage to the seat position sensor If there are any defects as mentioned below, replace the seat position sensor with a new one
      • Cracks, dents or chips on the sensor housing
      • Cracks or other damage to the connector
      CAUTION: For removal and installation procedures of the seat position sensor, be sure to follow the correct procedure.
scientia non olet · About LEMON Manuals