Wiper Switch: Installation
WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
- Attach the claw to install the wiper switch.
- Connect the 2 connectors.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)
- Attach the claw.
- Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel
- Attach the 2 claws to install the lower steering column cover.NOTE: Do not damage the tilt and telescopic switch.
- Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.
- INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)
- Connect the connector
- Attach the claw.
- Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.
- Attach the 2 claws to install the lower steering column coverNOTE: Do not damage the tilt and telescopic switch.
- Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002