LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2009 >> LS 600hL >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Air Conditioning) >> Smog Ventilation Sensor >> Installation

Smog Ventilation Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus LS 600hL. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SMOG VENTILATION SENSOR 
    1. Install the sensor with the bolt

      Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 

      Fig 1: Locating Smog Ventilation Sensor Connector And Bolt
      G04950821Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  2. INSTALL COOL AIR INTAKE DUCT SEAL 
    1. Install the duct seal with the 2 clips.
  3. INSTALL AIR CLEANER INLET COVER 
    1. Install the cover with the 2 clips.
  4. INSTALL ENGINE ROOM SIDE COVER LH 
    1. Install the cover with the 4 clips
  5. INSTALL ENGINE ROOM SIDE COVER RH 
    1. Install the cover with the 4 clips.
scientia non olet · About LEMON Manuals